Laser cutting of Plywood

Plywood

Laser cutting services de contrachapado El contrachapado se usa en diversas áreas, desde el diseño decorativo y restauración hasta la fabricación de muebles y construcción de maquinaria. El…

Plywood laser cutting services

Plywood is used in various areas, from decorative design and restoration to furniture manufacturing and machine building.

Laser cutting of plywood makes it possible to manufacture smaller parts that cannot be obtained with other processing modes. In CNC the program provides the most exact path of the laser beam which guaranteesa precision of up to 0.05 mm, a perfect cut and quality edges. Even if the pieces are very thin and fragile, the absence of mechanical pressure reduces the probability of them deforming and breaking.

It is important to note that this processing mode leaves virtually no waste products, making it the most economical and profitable, especially for large-run, voluminous orders. By comparing this processingWith strawberry the savings can reach 40%. It all depends on the thickness of the material, the complexity of the pieces required and the amount of plywood.

The laser beam has a minimum diameter that allows cutting products of just a few millimeters. Even a small black mark at the contact points between the beam and the material being processed is not a problem, in most cases it remains as a partdecorative or simply sanded along the edges.

How do we work and how to find out the exact cost of laser cutting plywood?

Request

You make a request for plywood cutting calculation.
Calculation preparation

The order calculation is made taking into account all the details.

Approval

You make the decision to accept our offer.

Prepayment

You cancel the prepayment of 30% up to 100% depending on the order.

Which plywood do we cut?

From our stock

We always try to have plywood with a thickness of up to 10 mm in stock.

From customer material

We accept ordersfor cutting the customer’s plywood. The calculation of orders with your material is carried out under individual terms.

On request

If we do not have the necessary plywood in stock, we can order it from our suppliers.

Why do they choose us to do laser cutting ofplywood

Cutting surface

Working surface of our laser machine is 2050*3050 mm

The thickness of plywood

Our equipment allows working with plywood up to 10 mm thick.

Notifications

We send notifications by SMS and email when the order is ready.

Convenient payment methods

Payment can be made online atthe website as well as the account.

Prices

We try to keep prices at the laser cut of low plywood.

General recommendations for technical tasks

It is not recommended to make each piece in a separate file, if possible make them in a single sketch or vector file. It is advisable to indicate the material (thickness, color) and number of pieces in the sketch together with the article and not in the file name, body of the letter or in the comments.

Hand-drawn sketches must contain:

Units of measurement (mm cm m);
Dimensions of pieces;
Diameters or radii of holes;
Distance from the edge of the piece to the axis of the hole;
Write as legibly as possible so they understand it.

Vector files (.cdrfor CorelDraw X5, .dxt, .ai, .pdf…):

All items are made at a 1:1 scale;
Piece measurements are not shown;
The drawing must not contain double lines;
All contours must be closed. The lines must not have breaks.

It does not perform countersinking, chamfering and milling of the material in laser cutting.

Make just one step to your order

And we will contact you within 2 hours during workday

Leave a review